The Army Green Service Uniform (AGSU), often referred to as “Pink and Greens,” is a new uniform that has been reintroduced into the U.S. Army. As of September 30, 2020, the Army was still in the process of finalizing detailed regulations for its wear. This guide, based on the interim guidance available at that time, serves as a helpful resource for understanding the proper wear of the AGSU. Please note that this information is based on the most recent available updates and soldiers should always refer to official Army publications for the most current and authoritative guidance.
This guide is designed to provide clarity on the initial guidelines for wearing the AGSU, ensuring soldiers present a sharp and professional appearance while adhering to Army standards.
Key Aspects of AGSU Wear (Interim Guidance – 2020)
While awaiting the Army’s finalization of AGSU wear regulations, the following points were established as interim guidelines. These points cover essential aspects of uniform wear, from badges to insignia, ensuring a standardized and respectful presentation of the uniform.
1. Badge Finish: Oxidized or Silver
Soldiers have the option to wear badges with either an oxidized or silver finish on the AGSU coat. However, mixing finishes is not permitted. All badges must be of the same finish – either all oxidized or all silver – to maintain uniformity and a cohesive look.
2. Nameplates: Not Authorized
Nameplates are not authorized for wear on either the AGSU coat or shirts. This is a departure from some other Army uniforms and simplifies the appearance of the AGSU, focusing attention on other insignia and awards.
3. Female AGSU Coat Insignia Placement
The female AGSU coat design incorporates pocket flaps instead of actual pockets. Consequently, the insignia placement on the female AGSU coat follows the same standards as the male uniform. This ensures consistency across all soldiers, regardless of gender, in the presentation of their awards and qualifications.
4. Identification Badges Per Pocket
To maintain a balanced and uncluttered appearance, no more than one identification badge is authorized per pocket. This regulation applies to pockets on the AGSU coat and ensures that the uniform does not become overburdened with badges.
5. Combat, Special Skills, and Marksmanship Badges
Regulations limit the number of combat and special skills badges, including marksmanship badges, that can be worn simultaneously. A maximum of four combat and special skills badges can be worn, with a further restriction of no more than three marksmanship awards at any one time.
Badges are positioned 1/4 inch above the ribbons or pocket flap. Alternatively, badges can be worn below the ribbons, 1/4 inch below the top of the pocket flap. This flexibility allows soldiers to arrange their badges in a manner that is both compliant and personally presentable.
6. Special Skill Tabs (Sewn-On)
For special skill tabs from group 4 (sewn-on), a maximum of two tabs can be worn on the AGSU coat. These tabs are to be sewn on the left sleeve, 1/2 inch below the shoulder seam. The Shoulder Sleeve Insignia (SSI) is positioned 1/4 inch below any tab, creating a structured and hierarchical display of sleeve insignia.
7. Unit Awards: Permanent or Temporary
Soldiers must choose to wear either permanently awarded unit awards or temporary unit awards. Mixing permanent and temporary unit awards on the AGSU is not authorized. This ensures clarity in representing unit achievements on the uniform.
8. Neckties: Four-In-Hand for All
The AGSU uniform requires the wear of four-in-hand neckties for both male and female soldiers. This traditional tie style contributes to the formal and professional appearance of the AGSU.
9. Soldier Sleeve Insignia (SSI) Placement
The Soldier Sleeve Insignia (SSI), representing the soldier’s unit, is worn on the left sleeve of the AGSU coat. It should be centered 1/2 inch below the shoulder seam. This placement is consistent and standard for all soldiers wearing the SSI.
10. SSI for Former Wartime Service
The SSI for Former Wartime Service is worn on the right sleeve, also positioned 1/2 inch below the shoulder seam of the coat. It is important to note that the combat service identification badge is not authorized for wear on the AGSU coat.
11. Regimental Distinctive Insignia (RDI)
Regimental Distinctive Insignia (RDI) is worn on the right side of the coat, centered 1/8 inch above the pocket flap, or 1/4 inch above any unit award or foreign badges. If the coat lapel obscures the RDI, it may be aligned to the right edge of the unit awards for better visibility.
12. Class B AGSU (Shirt) Restrictions
On the Class B AGSU (shirt), no badges or accouterments are authorized for wear. Additionally, U.S. and branch insignia are not authorized on the Class B shirt. This maintains a simpler, more streamlined appearance for the Class B version of the AGSU.
Further Guidance and Updates
This guidance was interim as of September 2020. Soldiers were encouraged to refer to the existing UNIFORM GUIDE for ASU (Army Service Uniform) regulations for aspects not explicitly covered in this interim guidance. For the most up-to-date and detailed regulations, always consult official Army publications and resources as they become available.
Guide to wearing the Army Green Service Uniform (AGSU) – Pink and Greens uniform regulations.
Army uniform ribbons and devices – AGSU badge placement and regulations guide.